Integrating spectral and non-spectral data to improve urban settlement mapping in a large Latin-American city     

Feilin Lai 《地理信息系统科学与遥感》2020,57(6):830-844

ABSTRACT

Information on urban settlements is crucial for sustainability planning and management. While remote sensing has been used to derive such information, its applicability can be compromised due to the complexity in the urban environment. In this study, we developed a remote sensing method to map land cover types in a large Latin-American city, which is well known for its mushrooming unplanned and informal settlements. After carefully considering the landscape complexity there, we designed a data fusion method combining multispectral imagery and non-spectral data for urban and land mapping. Specifically, we acquired a cloud-free Landsat-8 image and two non-spectral datasets, i.e., digital elevation models and road networks. Then, we implemented a set of experiments with different inputs to evaluate their merits in thematic mapping through a supervised protocol. We found that the map generated with the multispectral data alone had an overall accuracy of 73.3% but combining multispectral imagery and non-spectral data yielded a land cover map with 90.7% overall accuracy. Interestingly, the thermal infrared information helped substantially improve both the overall and categorical accuracies, particularly for the two urban classes. The two types of non-spectral data were critical in resolving several spectrally confused categories, thus considerably increasing the mapping accuracy. However, the panchromatic band with higher spatial resolution and its derived textural measurement only generated a marginal accuracy improvement. The novelties of our work are with the successful separation between the two major types of urban settlements in a complex environment using a carefully designed data fusion approach and the insight into the relative merits of the thermal infrared information and non-spectral data in helping resolve the issue of class ambiguity. These findings should be valuable in deriving accurate urban settlement information which can further advance the research on socio-ecological dynamics and urban sustainability.  相似文献   

Magnitude of latent heat in thermally loaded clays     

Sergio Samat  Laurent Brochard  Ioannis Stefanou 《国际地质力学数值与分析法杂志》2020,44(14):1926-1957

Temperature changes are known to induce specific couplings in clay, in particular, an anomalously high thermal pressurization in undrained conditions or a thermal compaction in drained conditions, both of which are potential threats for the mechanical stability and sealing capacity of the geomaterials. Thermodynamical analysis of those peculiar thermomechanical couplings points to a potentially important latent energy, which in turn could limit the temperature change upon heating or cooling. The direct measurement of latent energy developed during a laboratory geomechanical test is challenging. Instead, proper identification of thermal hardening in conventional experiments with temperature changes provides an alternative route to estimate latent energy. In this work, existing laboratory thermomechanical tests of clays are analyzed with a rigorous thermodynamic framework to quantify the magnitude of latent energy in thermomechanically loaded clays. A thermodynamically consistent constitutive model for fully saturated clays that combines two key features, (a) the temperature dependence of the blocked energy and (b) the framework of bounding plasticity, is proposed. The performance of the model is validated by reproducing results obtained in laboratory tests for Boom and Opalinus clays. The thermomechanical loads considered to validate the model performance were then used to estimate the percentage of work that remains latent in the clayey material during plastic yielding. We find that the magnitude of latent energy is quite significant, typically a few tens of percent of the total dissipated energy, and increases significantly with temperature. Accordingly, it is expected to play an important role in the thermomechanical response of clays.  相似文献   

周期性的或伴有贯穿流的西边界流跨隙流动的迟滞变异过程     

宋新新  袁东亮  王铮 《海洋学报(英文版)》2019,38(4):90-96

使用1.5层准地转约化重力模式研究了周期性的或伴有贯穿流的西边界流跨隙流动的迟滞变异过程。当西边界流变化的周期比罗斯贝波在缺口处调整的时间尺度大得多时，在雷诺数增加和减少过程的霍夫分叉点都发生延迟，从而产生新的雷诺数迟滞区间；并且西边界流流态转变的临界值变化显著；且周期强迫越短，雷诺数迟滞区间越大。当西边界流变化的周期与罗斯贝波在缺口处调整的时间尺度相当时，西边界流在缺口的流态呈无迟滞的周期性变化，且西边界流入侵西海盆的程度随周期减少而变小。此外，当贯穿流的流量大于西边界流的一半时，会显著影响西边界流在缺口处的迟滞变异过程；西边界流向西入侵程度和流态转变发生的临界雷诺值均发生变化，且贯穿流流量越大变化越大。  相似文献   

高强耐热铝合金钻杆材料优选          下载免费PDF全文

梁健  尹浩  孙建华  李亚红  王成彪  张金昌 《探矿工程》2020,47(4):65-71

铝合金钻杆的使用性能是制约深部钻探技术发展的“瓶颈”。本文综合考虑孔内工况因素和钻杆性能因素，以钻柱组合设计为基础准则，从特深孔钻探工程技术需求出发，开展了高强耐温铝合金钻杆材质选择和评价的试验研究。试验结果表明：2219铝合金固溶时效制度分别为535 ℃/1 h、165 ℃/20 h，2618铝合金固溶时效制度分别为530 ℃/1 h、200 ℃/20 h；2219铝合金在高温长时间暴露后的室温力学性能优于2618铝合金，在高温瞬时条件下的力学性能劣于2618铝合金；2219铝合金中含有Zr，该元素在热暴露过程中起到减缓溶质扩散速率的作用，这对提高热暴露后的剩余强度是有利的。  相似文献   

河北武城凸起地热田地热地质特征     

王迪  汪新伟  毛翔  武明辉  刘慧盈  张瑄  王婷灏 《地学前缘》2020,27(3):269-280

在“雄县模式”和环境压力的双重驱动下,河北地区已形成我国最大的地热供暖城市群。因此,研究武城凸起地热田地热地质特征,对河北省故城县地热开发具有重要的指导意义。本文通过测井、地震和区域地质资料,结合水化学特征、同位素测试结果的分析,系统分析了地热田的不同类型热储展布、储集层物性、地下热水补给来源和循环路径特征,并精细评价了地热资源量。结果表明武城凸起地热田热储类型主要为馆陶组砂岩热储和奥陶系岩溶热储。砂岩热储区域稳定分布,主要产水层为下馆陶组,底板埋深1 200~1 600 m,单井出水量79~123 m³/h, 井口水温52~54 ℃;岩溶热储有利区带主要分布在寒武—三叠系卷入的背斜核部,呈南北向带状展布,主要产水层为上马家沟组、下马家沟组和亮甲山组,顶板埋深2 100~2 900 m,单井出水量75~98 m³/h,井口水温82~85 ℃。地下热水来源为西部太行山脉和北部燕山山脉,热水沿着NE-SW向断裂破碎带和岩溶不整合面向上水平运移进入浅层热储,通过沧县隆起和邢衡隆起在武城凸起汇集,形成中低温地热田。地下热水质类型为Cl-Na型,最大循环深度为2 822.5~3 032.5 m,¹⁴C测年表明砂岩热储和岩溶热储年龄分别为21 ka和32 ka。明化镇组和石炭—二叠系分别为两套热储的直接盖层。武城凸起地热田地热资源量分层精细评价结果表明,热储地热资源量合计4.86×10¹⁰ GJ,折合标煤16.6×10⁸ t。年可开采地热资源量可满足供暖面积1.1×10⁸ m²,市场开发潜力巨大。  相似文献   

燕山中部大地热流及岩石圈热结构特征——以承德市七家- 茅荆坝地热田为例     

刘峰  王贵玲  张薇  岳晨  陆川  黄起伟  欧小科 《地质学报》2020,94(7):1950-1959

燕山中部地区地热资源丰富,地热地质条件较好,但该地区大地热流测量工作较少,岩石圈热结构研究尚未开展,制约了该地区的地热地质研究与资源勘探开发。本文以该地区的七家-茅荆坝地热田为典型区,结合地温测井、取样测试、数据收集与分析,初步查明燕山中部大地热流特征及浅部-深部岩层热物性特征,填补了大地热流值测量空白区,在此基础上建立了研究区热结构概念模型,估算其深部地温分布。研究得出燕山中部大地热流值变化较大,平均约57 mW/m~2,与周边温泉水温存在较好的相关关系。其中七家-茅荆坝地热田大地热流值较高,为74.9 mW/m~2。通过深部地温分布计算得出七家—茅荆坝地区居里面埋深为21.5～22.8 km,莫霍面温度约815℃,分析结果与前人研究成果较为一致,验证了本文所建立岩石圈热结构模型的准确性。  相似文献   

Microstructure Evolution of Organic Matter and Clay Minerals in Shales with Increasing Thermal Maturity     

GU Yuantao  LI Xiaoxi  YANG Shuguang  WAN Quan 《《地质学报》英文版》2020,94(2):280-289

As the two important components of shale, organic matter(OM) and clay minerals are usually thought to strongly influence the hydrocarbon generation, enrichment and exploitation. The evolution process of OM and clay minerals as well as their interrelationship over a wide range of thermal maturities are not completely clear. Taking Yanchang(T_3y), Longmaxi(S_1l) and Niutitang(?_1n) shales as examples, we have studied the microstructure characteristics of OM and clay minerals in shales with different thermal maturities. The effects of clay minerals and OM on pores were reinforced through sedimentation experiments. Using a combination of field emission scanning electron microscopy(FESEM) and low-pressure N_2 adsorption, we investigated the microstructure differences among the three shales. The results showed that both OM and clay minerals have strong effects on pores, and small mesopore(2–20 nm) is the dominant pore component for all three samples. However, the differences between the three samples are embodied in the distribution of pore size and the location. For the T_3y shale, clay minerals are loosely arranged and develop large amounts of pores, and fine OM grains often fill in intergranular minerals or fractures. Widespread OM pores distribute irregularly in S_1l shale, and most of the pores are elliptical and nondirectional. The ?_1n shale is characterized by the preferred orientational OM-clay aggregates, and lots of pores in the composites are in the mesopore range, suggesting that over maturity lead to the collapse and compaction of pores under huge pressure of strata. The results of the current research imply that with increasing thermal maturity, OM pores are absent at low maturity(T_3y), are maximized at high maturity(S_1l) and are destroyed or compacted at over-mature stage(?_1n). Meanwhile, clay minerals have gone through mineral transformation and orientational evolution. The interaction of the two processes makes a significant difference to the microstructure evolution of OM and clay minerals in shale, and the findings provide scientific foundation in better understanding diagenetic evolution and hydrocarbon generation of shale.  相似文献   

渭河盆地地温场分布规律及其控制因素     

任战利  刘润川  任文波  祁凯  杨桂林  崔军平  杨鹏  张园园 《地质学报》2020,94(7):1938-1949

本文以渭河盆地地温场为研究对象,在收集补充新地热井资料及分析测试样品的基础上,通过盆地深部结构、构造特征、地温场特征、热储层特征、地热资源量等分析,建立了盆地不同岩性岩石热导率与深度关系图版,确定了盆地地温场变化规律及地热田控制因素,提出了渭河盆地地热田形成模式。评价了盆地地热资源有利区,为盆地后续的开发利用提供了理论支持。研究认为渭河盆地热地温梯度分布在2.34～5.85℃/100m之间,平均地温梯度为3.50℃/100m,代表性大地热流68.33mw/m~2,地温梯度及不同深度地层温度具有东高西低、南高北低的特点。热导率总体上具有随深度的增加,逐渐增大的规律,热导率随深度增加主要受压实程度增强控制。相同深度条件下泥岩热导率最低,砂岩热导率居中、白云岩热导率最高。渭河盆地主要为层状地热田,盆地内地热通过热传导及热对流两种方式进行传递,以热传导为主。渭河盆地地热资源丰富,热储层可分为三种类型:①新生界砂岩孔隙型;②下古生界碳酸盐岩岩溶型;③断裂型。渭河盆地地热资源有利区主要分布于西安凹陷、固市凹陷。盆地地温场及地热田分布与莫霍面、软流圈上隆、岩石圈厚度减薄的深部背景密切相关,主要受地热传导和深大断裂热对流控制,是岩石圈深部结构、盆地构造、基底岩性、储盖组合等多因素共同作用下形成的。最后结合当前渭河盆地地热资源开发利用现状及存在问题,提出了地热开发利用建议。  相似文献   

驯化水温及温升速率对三门湾三种虾蟹类热耐受性的影响   总被引：1，自引：1，他引：0  

田洪林  曹亮  刘金虎  窦硕增 《海洋科学》2018,42(4):43-52

作者采用动态实验法与静态实验法相结合的方法,研究了三门湾脊尾白虾(Exopalaemon carinicauda)、口虾蛄(Oratosquilla oratoria)和日本(Charybdis japonica)在不同季节的基础水温即驯化水温(8~29℃)和温升速率(0.5~15.0℃/h)下的热耐受能力。结果表明,驯化水温和温升速率对各实验动物的热耐受性均有显著影响。实验动物的热耐受性与驯化水温总体上呈显著正相关,而温升速率对热耐受性的影响具有物种特异性,并受驯化水温制约;在不同驯化水温下,各实验动物的热耐受性随温升速率增大呈不同变化趋势。各实验动物的24 h高起始致死温度受驯化水温的影响显著,随着驯化水温从8℃升高到29℃,脊尾白虾、日本和口虾蛄的24hUILT50分别从24.2、34.6、24.9℃显著增大到35.3、37.4和34.4℃。结合3种实验动物的最大临界温度分析,它们的热耐受能力依次为:日本脊尾白虾口虾蛄。研究结果可为探究三门湾水域潜在的热污染状况及其生态环境效应提供科学依据。  相似文献   

Terrestrial heat flow and lithospheric thermal structure in the Chagan Depression of the Yingen-Ejinaqi Basin,north central China     

Yinhui Zuo  Shu Jiang  Shihu Wu  Wei Xu  Jiong Zhang  Renpeng Feng  Meihua Yang  Yongshui Zhou  M. Santosh 《Basin Research》2020,32(6):1328-1346

The Chagan Depression in the Yingen-Ejinaqi Basin, located at the intersection of the Paleo-Asian Ocean and the Tethys Ocean domains is an important region to gain insights on terrestrial heat flow, lithospheric thermal structure and deep geodynamic processes. Here, we compute terrestrial heat flow values in the Chagan Depression using a large set of system steady-state temperature data from four representative wells and rock thermal conductivity. We also estimate the “thermal” lithospheric thickness, mantle heat flow, ratio of mantle heat flow to surface heat flow and Moho temperature to evaluate the regional tectonic framework and deep dynamics. The results show that the heat flow in the Chagan Depression ranges from 66.5 to 69.8 mW/m², with an average value of 68.3 ± 1.2 mW/m². The Chagan Depression is characterized by a thin “thermal” lithosphere, high mantle heat flow, and high Moho temperature, corresponding to the lithospheric thermal structure of “cold mantle and hot crust” type. We correlate the formation of the Yingen-Ejinaqi Basin to the Early Cretaceous and Cenozoic subduction of the western Pacific Plate and the Cenozoic multiple extrusions. Our results provide new insights into the thermal structure and dynamics of the lithospheric evolution in central China.  相似文献